Vantec HDA-250M Single 2.5" to 3.5" Drive Mounting Kit
Review Submitted!
Your product review has been submitted! Our moderation team will take a look and if meets our submission guidelines you should see it online shortly.
- 1
- 2
Monday, October 13, 2014
By: Josh
From: Edmonton
Tuesday, January 28, 2014
By: Ogre
From: Edmonton
Strengths:
-metal, sturdy, will not flex
-very nice black paint, doesn't chip, and non-conductive
-screws provided work with every SSD and 2.5" HDD, the holes are in the right place too
Weaknesses:
none
Additional Comments:
I've purchased five of these over a year. Every single one came with bottom holes predrilled, so I'm not sure if the guy in Calgary reviewed the same product.
It's made of metal, will not flex like some of the competitor's plastic, and it has a matte finish like a spray-in-lining in a truck.
Ask the staff at ME to open one up for you, you won't be disappointed or aggravated.
Wednesday, December 18, 2013
By: Mark
From: Calgary
Strengths:
None that I could see.
Weaknesses:
Product only has mount holes on the side, if you case requires screws to be mounted to the bottom this does not work, you have to purchase the "dual" version of this product.
Additional Comments:
As the other review stated, standard China junk.
Thursday, June 27, 2013
By: Aggravated
From: Calgary
Strengths:
- It's Metal.
Weaknesses:
- Side holes where the mount should fit into a 3.5-inch slot are sized for M3 screws (which are fine and dandy for 2.5-inch drives) instead of the standard sized 6-32 screws (you know, the kind that mount hard drives); I tried forcing the larger size screw thread in but I end up stripping my screw.
- Poor positioning of these holes make it so that the slot won't line up flush with low clearance spacing for a hard drive.
Additional Comments:
Standard fair made in china rebranded garbage. The packaging states that it is perfect and easy to mount. The lack of bottom mount holes as well as poor hole positioning near the 90 degree bend make this piece of metal feel like the company that produced it never took a caliper to a 3.5" inch hard drive before. I think I will be taking mine back as it is seriously defective. Does not work in an Antec 902!
- 1
- 2