Matter3D Basics Series Metallic PLA, 1.75mm, Satin White, 1kg

MX00127743 Basics Series Metallic PLA, 1.75mm, Satin White, 1kg
MX00127743 Basics Series Metallic PLA, 1.75mm, Satin White, 1kg

Product Info

Matter3D Basics PLA Series is a new formulation created by the scientists at Matter3D. The genesis of this material was linked to the feedback we had gotten from our partners regarding the Performance PLA Series. The Basics series is a more printable version of the Performance line and is primarily designed for cosplay and prototyping. The Basics PLA is also very impact resistant. We have added impact modifiers to the material that lower the modulus significantly compared to virgin PLA.

The Basics Series - PLA Metallic line adds a silk/pearl - like sheen to the Basics material. These products are ideal for hiding layer lines, cosplay, or products where aesthetics are especially important. The Metallic line is marginally more abrasive than the Unfilled Basics PLA.

The Basics PLA series is a highly printable material that is lower in bulk crystallization, stiffness, temperature resistance (<65°C), and more impact resistant than the Performance Series. It is essentially a more amorphous PLA material that is extremely forgiving when printed. This material requires no modifications to even the basic 3D printing setups. It is designed to be used by anyone, anywhere, on any machine.

Material Specific Notes:

  • Pearl White PLA - The material has a nice pearly/creamy finish that shimmers in light and does a very good job of hiding layer lines.
  • Silk White PLA - The material has a silk/metal-like true white finish. The material is great for hiding layer lines.
  • Steel Wool PLA - The Steel Wool material is dark grey with a metallic finish. The material is great for hiding layer lines.
  • Metallic Red PLA - The Metallic Red material is crimson red material that has a finish that looks metallic. This material is also great for hiding layer lines.
  • Glitter Blue PLA - The Glitter Blue material is bright blue with a sparkle finish. The material really shimmers in light but is also glittery in low light situations. The sparkles are smaller than other 'Galaxy' filaments on the market. The material is not abrasive and does not require any post processing.

Annealing:

Matter3D's Basics PLA series is not able to be annealed. This is a result of the lower crystallinity of the bulk polymer.

Matter3D’s Basics PLA is precision extruded and immediately vacuum-sealed before shipping with desiccant for protection against moisture. This product is available in 1 kg spools (2.2 lbs). Matter3D always recommends drying your filaments before use.

This filament is ideal for use with practically all desktop 3D printers, such as Makerbot, Prusa, Ender, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75 mm or 2.85 mm filament.

Proudly compounded and manufactured in Canada!

Features

  • Highly printable PLA filaments with a silk/pearl-like sheen
  • Temperature (<65°C) & impact resistance
  • Available in a wide variety of colours and in 1.75 mm or 2.85 mm filaments
  • Compatible with most 3D printers
  • Vacuum-sealed 1 kg spool
  • Proudly made in Canada!

Compatibility

This filament is ideal for use with practically all desktop 3D printers, such as Makerbot, Prusa, Ender, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75 mm or 2.85 mm filament.

Common Issues:

  • The prints with the Metallic Line are stringy
    1. 1. Dry the material. The additives used to give PLA a silk/pearl-like sheen are hygroscopic. Drying will eliminate 90% of stringing issues (Cardboard spools are glued together, take care when handling after drying as the glue may melt).
    2. Reduce nozzle temperature. Typically materials with additives have lower melting and glass transition temperatures. Try reducing temperature by 10°C or print a temperature tower.
    3. Increase Retraction. Increasing retraction ensures that the nozzle is cleared before hopping/moving to a different part of the print preventing the formation of strings.
  • The print is sagging or looks molten
    • Increase cooling. The Matte line likes to have a lot of air moving over it as its being laid down by the printer. Increasing your fan speed will ensure the material is cooled quickly during printing.

Specifications

Product Type Metallic PLA Filament
Part Number FIL-1028-00-10-1-SAT
Colour Satin White
   
Diameter 1.75 +/- 0.05mm
Density 1.24 g/cc
Nozzle Size ≥ 0.15 mm
Nozzle Temperature 190 - 215 °C
Bed Temperature < 65 °C
Bed Prep Hairspray, Glue Stick, Polyimide (Kapton) surface
Layer Height ≥ 0.1 mm
Print Speed ≤ 100 mm/sec
Fan speed 50 - 100%
   
Packaging Spool
Length 335 m
Weight 1 kg